AEG FAVORIT 34030 I User Manual page 32

32
Setting the water softener
German degrees
(°dH)
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.
Manual adjustment
Turn the water hardness dial to the position 1 or
2 (refer to the table).
Electronic adjustment
1. Press and hold the start/cancel button.
2. Turn the programme knob clockwise until the programme marker agrees with the
first available washing programme on the control panel.
3. Release the start/cancel button when the on/off and the start/cancel indicator lights
start to flash.
4. At the same time, the end-of-programme indicator light starts to flash. The number
of flashes shows the current adjustment.
Example: 5 flashes / pause / 5 flashes = level 5.
5. Press the start/cancel button to change the adjustment. Each time you press the start/
cancel button, the adjustment goes to the subsequent level.
6. Switch off the appliance to keep the operation.
If the water softener is set electronically to the level 1, the salt indicator light stays off.
Water hardness
French degrees
(TH°)
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
< 7
mmol/l Clarke de-
grees
5,1 - 6,4 36 - 45
4,0 - 5,0 28 - 35
3,3 - 3,9 23 - 27
2,6 - 3,2 18 - 22
1,9 - 2,5 13 - 17
0,7 - 1,8 5 - 12
< 0,7 < 5
Water hardness ad-
justment
manually elec-
troni-
cally
1) 7
2
1) 6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1