Electrolux EWN 12791 W User Manual page 14

Table of Contents

Advertisement

Available languages

Available languages

14 electrolux use
You must select this option after you
have set the programme and before you
press the Start/Pause button.
If you wish to add laundry in the
machine during the delay time you will
press Start/Pause button to put the
machine in pause. Add the laundry,
close the door and press Start/Pause
button again.
You can cancel the delay time at any
moment, before you press the
Start/Pause button.
The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of
20 hours by means of this button.
Selecting the delayed start.
• Select the programme and the
required options.
• Select the delay start.
• Depress Start/Pause button: the
machine starts its hourly countdown.
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Depress Start/Pause button.
• Depress Start/Pause button, the
0'
symbol
is displayed.
• Depress Start/Pause button again.
The Delay Start cannot be selected
with Drain
programme.
Display
The display shows the following
information:
Duration of the selected programme
After selecting a programme, the
duration is displayed in hours and
minutes (for example 2.05). The
segments inside the clock icon are
animated.
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
Planchado
Temp.
Centrifug.
fácil
After the programme has started, the
time remaining is updated every minute.
Washing programme phase icons
By selecting the wash programme, all
the washing programme phase icons
corresponding to the various phases
making up the programme are shown in
the upper part of the display.
Planchado
Temp.
Centrifug.
fácil
After you have pressed the Start/Pause
button and the machine has started, the
Door icon is lighted-on and only the
phase running icon stays on. When the
programme has finished, a flashing zero
(
0.00
) is displayed and the
icon desappears.
Delay
The selected delay (20 hours max) set
by means of the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed. The relevant
phase icon
is lighted-on.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
Time
Manager
Inicio
AquaCare
diferido
Inicio/
Pausa
Time
Manager
Inicio
AquaCare
diferido
Inicio/
Pausa
(Door)

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents