Specifications - GLOW EZ Lock Deep Parabolic Softbox Manual

Optional Beauty Dish Adapter Insert Ring
2. On the mounting end of the softbox, locate the four tabs that are
holding the speedring in place
3. Unscrew and remove the only thumb nut. With a Philips head
screwdriver, loosen the three screws, on the ring plate tabs, enough
to slip the adapter ring free. The reflector mount ring slips out
effortlessly from the grasp of the three other tabs.
4. Choose the Glow 144mm Adapter Ring to match the mount style of
your flashhead. The wide flange of the new speedring adapter fits
under the three fixed tabs. Securely tighten the three ring plate tabs
and replace the thumb nut. Follow your strobe's instructions
for installing a light modifier.

SPECIFICATIONS

Materials Reinforced Fabric, Aluminum Rods, Aluminum Ring
Finish Silver interior, black matte exterior, custom trim
Mount
Interchangeable Bowens speedring supplied (Insert Size 144mm)
Sections 16
Interior Smooth Silver
Rods
16 Aluminum
Specifications
Diameter 19.5" / 49.5cm
open
Depth open
Weight
Dimensions
closed
7
GLSBEZ20 GLSBEZ28
27.5" / 70cm
20.0" / 51cm 23.25" / 59cm
2lb 15.5oz / 2lb 15.5oz /
1.2kg
22x7.5"/ 26.75x7.5"/
56x19cm 68x19cm
GLSBEZ38
36.5" / 92cm
28.75" / 73cm
4lb 1oz / 1.85kg
1.3kg
34x7.5"/
86.4x19cm
144mm
GLSBEZ48
46" / 118cm
28.75" / 73cm
4lb 4oz / 1.92kg
26.75x7.5"/
68x19cm
GlowLightControl.com