Advertisement
Quick Links
Advertisement
Related Manuals for GLOW EZ Lock Beauty Dish
Summary of Contents for GLOW EZ Lock Beauty Dish
- Page 1 EZ Lock Beauty Dish Guide...
- Page 2 With the Glow EZ Lock Beauty Dish Eggcrate Grid, you gain more control of a light source’s beam and can feather light for a more attractive shadow, virtually eliminating spill from the rest of the body and the background.
- Page 3 • Store in a cool and dry environment. • The EZ Lock Beauty Dish and diffusers can be hand cleaned with cold water and mild detergent. Air dry. • Handle this beauty dish with care when opening and closing.
-
Page 4: Setup Instructions
Setup Instructions Remove the EZ Lock Beauty Dish from the carrying case. Rest the back of the beauty dish, the Bowens speedring, on a flat surface and gently spread out the aluminum rods that support the fabric saucer. Grasp the aluminum EZ Lock mechanism that is suspended in the hub of the rod spokes to slightly spread the ribs for the next step. -
Page 5: Optional Steps
Optional Steps Attach the inner diffuser. The inner layer baffle can be used with or without the deflector cap. The more diffusion, the less dramatic the beauty dish wrap. The fabric snaps onto the interior elastic tabs that are on each rod spoke. Attach the outer diffuser. - Page 6 Optional Steps Attach the Eggcrate Grid. The grid attaches using the Velcro touch sensitive strips running along the inside edge of the bowl. Align the shape carefully to match the beauty dish shape for the strongest feathering. Press the surfaces firmly to seal the grid for spill control and drama.
-
Page 7: Specifications
Optional Beauty Dish Adapter Insert Ring If your flash uses a different mount than the Bowens, a Glow 144mm speedring adapter is needed. The process is simple to exchange the reflector’s mount ring: On the mounting end of the dish,... - Page 8 Glow may direct with a copy of the sales receipt or dated itemized receipt. Glow may, at its option, replace your product, offer to provide a functionally equivalent product, or repair any product with new, refurbished or used parts as long as such parts comply with the product’s technical specifications.