Care And Maintenance - Electrolux PERFECT DB 1 Series Operating Instructions Manual

water to steam through and activate
the steam chamber.
3 You will obtain optimal steaming
results and the noise produced by the
steaming will be steadier after the
water reservoir has been filled and
drained three times.
Ironing with Steam
To steam iron, set the temperature
selector (Figure 1/N) to the required
fabric type and wait until the power
indicator (Figure 1/J) goes out - only
then set the steam selector (Figure 1/F)
to the desired position (Figure 4/B). You
will find which temperature setting
(fabric type) matches which steam set-
ting in the ironing table. As soon as the
steam iron is held horizontally steam
begins to form. When the steam iron is
set upright again the steam supply
stops automatically.
Spray Function (Figure 6/A)
The first time you use the appliance,
or if you have not used it for a long
time, you will need to press the spray
function button (Figure 1/H) several
times before water comes out of the
spray nozzle (Figure 1/D). You can also
use the spray function when dry iron-
ing.
Super Steam Jet Function
(Figure 6/B)
The super steam jet function is of
valuable assistance when ironing, for
example, creases, embroidery etc. You
can trigger the additional steam jet
both when steam ironing and when dry
ironing.
0 Set the temperature selector
(Figure 1/N) to the "MAX" position and
wait until the correct temperature has
been reached, i.e., until the power indi-
cator (Figure 1/J) goes out.
0 Raise the steam iron a little away from
the material and press the steam jet
button (Figure 1/G).
Always wait another 5 seconds before
pressing the steam jet button again.
Steaming hanging items of
clothing
0 Turn the temperature selector
(Figure 1/N) to the "MAX" position
and wait until the power indicator
(Figure 1/J) goes out.
0 Hang the article concerned on a
hanger and hold the steam iron at
a distance of 10 – 20 cm from the
material.
0 Now press the steam jet button
(Figure 1/G). Wait at least 5 seconds
before pressing the button again.
Warning: Do not attempt to freshen
1
up clothing whilst it is still being worn.
Risk of burning!
Drip Stop
The steam iron has an automatic drip
stop function. The drip stop immedi-
ately interrupts the creation of steam
if the temperature selected is too low.
Storage
Remove the plug from the socket!
Set the temperature selector
(Figure 1/N) to the "Cold" position
(Figure 2/a) and the steam selector
(Figure 1/F) to position
4/A).
„ "
Empty out remaining water (Figure 7).
Store the appliance standing upright.
To store properly wrap the mains cord
around the cord storage (Figures 1/M
and 8).

Care and Maintenance

The steam iron has an automatic decal-
cification feature, which significant
slows down the deposit of limescale in
the steam chamber.
The steam iron must not be des-
1
caled! Neither vinegar nor proprie-
tary brands of descaler must be
filled into the water reservoir!
g
(Figure
„ "
13