US Robotics USR5422 Installation Manual page 6

802.11g 54mbps usb adapter

Hide thumbs Also See for USR5422:

Available languages

Step One: Install your software and drivers

ATTENTION: You must install your software and drivers before you physically connect the 802.11g

54Mbps USB Adapter

Insert your U.S. Robotics Installation CD-ROM into your CD-ROM drive.

Note: If your CD-ROM does not automatically launch, click Windows Start, Run, and type

D:\setup (if your CD-ROM drive uses a different letter, type that letter in place of "D") and

click OK.

The Installation CD Graphic User Interface (GUI) will appear on your screen. If prompted, select your

preferred language. Read the license agreement and click Yes.

Select the 802.11g 54Mbps USB Adapter and then click Software. Click

Wireless USB Adapter Utility and Drivers. Follow the on-screen instructions to finish the installa-

tion procedure.

Windows Me: If you are prompted, restart your computer and continue to follow the on-screen

instructions.