Specifications; Technical Manuals - Snapper 18HP User Manual

NOTE: Specifications are correct at time of printing and are subject to change without notice.
ENGINE:
18 HP* Kohler
Make Kohler
Model Courage 18
Horsepower 18 @ 3400 rpm
Displacement 32.6 Cu. in (535 cc)
Electrical System 12 Volt, 15 amp. Alternator, Battery: 340
CCA
Oil Capacity 1.6 qt. ( 1.5L) w/ Filter
19 HP* Kawasaki
Make Kawasaki
Model FH580V
Horsepower 19 @ 3600 rpm
Displacement 35.7 Cu. in (585 cc)
Electrical System 12 Volt, 13 amp. Alternator, Battery: 340
CCA
Oil Capacity 3.8 US pt. ( 1.8L) w/ Filter
20 HP* Kohler
Make Kohler
Model Courage 20
Horsepower 20 @ 3400 rpm
Displacement 36.4 Cu. in (597 cc)
Electrical System 12 Volt, 15 amp. Alternator, Battery: 340
CCA
Oil Capacity 1.6 qt. ( 1.5L) w/ Filter
20 HP* Briggs & Stratton
Make Briggs & Stratton
Model Vanguard
Horsepower 20 @ 3400 rpm
Displacement 34.75 Cu. in (570 cc)
Electrical System 12 Volt, 16 amp. Alternator, Battery: 340
Engine Power Rating Information
The gross power rating labels for individual gas engine models meet or exceed SAE (Society of Automotive
Engineers) code J1940 (Small Engine Power & Torque Rating Procedure) and rating performance has been
obtained and corrected in accordance with SAE J1995 (Revision 2002-05). Actual gross engine power may be
lower and is affected by, but not limited to, ambient operating conditions and engine to engine variability. Given
both the wide array of products on which engines are placed, and the variety of environmental issues applicable
to operating the equipment, the gas engine will not develop the rated gross power when used in a given piece of
power equipment (actual "on-site" or net horsepower). This difference is due to a variety of factors including, but
not limited to, accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application
limitations, ambient operating conditions (temperature, humidity, altitude), and engine to engine variability.
.

Technical Manuals

Additional copies of this manual are available, as well as
fully illustrated parts lists. These manuals show all of
the product's components in exploded views (3D
illustrations which show the relationship of parts
and how they go together) as well as part
numbers and quantities used. Important
assembly notes and and torque values are also
included.
For applicable manuals currently available for your model,
contact our Customer Publications Department at 262-284-8519
(Simplicity) / 866-313-6682 (Snapper). Have the information listed
in the box below available when phoning in your request. Technical manuals can be
downloaded from
www.simplicitymfg.com | www.snapper.com
CCA
Oil Capacity 56 Oz. (1.7 L) w/ Filter
CHASSIS:
Fuel Tank Capacity: 6.5 Gallons (24.6 L)
Rear Wheels Tire Size: 20 x 8.00 -10
Inflation Pressure: 15 psi (1,03 bar)
Front Wheels Tire Size: 11 x 4.00-5
Inflation Pressure: 40 psi (2,76 bar)
TRANSMISSIONS:
HydroGear BDP-10A / HGM-12P
Type Pump and Wheel Motor
Hydraulic Fluid 20W-50 conventional detergent motor oil
Speeds Forward: 0-7 MPH (0-11.27 km/h)
@ 3400 rpm Reverse: 0-5 MPH (0-8.05 km/h)
Continuous Torque 266 ft. lbs. (359 N.m.)
Output
Maximum Weight 2000 lbs. (907 Kg) per Axle
on Axle
DIMENSIONS:
Overall Length 78" (190,5 cm)
Overall Width 41.5" (105 cm)
Height 42" (107 cm)
Weight (apx.)
With 50" Mower Deck 723 lbs. (328 kg)
With 44" Mower Deck 712 lbs. (322 kg)

Specifications

Technical Manuals
39