Subscribe to Our Youtube Channel
Related Manuals for Breas Medical Nippy 3+
Summary of Contents for Breas Medical Nippy 3+
- Page 1 The Lane Fox Respiratory Unit ® Nippy ventilator and HC150 humidifier Patient start-up user guide ...
- Page 2 Contents Contents What is bi-level ventilation? What’s included in your bag? ® Nippy 3+ and humidification setup Starting treatment Stopping treatment Controlling the humidity level Looking after your equipment Contact us ...
- Page 3 ® This guide is for the set-up and daily use of your Nippy 3+ and HC150 humidifier. For full details, please refer to the manufacturer’s instruction manuals inside your ventilator bag. What is bi-level ventilation? Bi-level ventilation is used to mechanically assist breathing.
- Page 4 1. Fill your humidifier chamber up daily with distilled or cooled boiled water. • Make sure your humidifier is switched off from the mains power. • Hold down the chamber guard and slide the humidification chamber out. • Empty out any excess water from the chamber and rinse thoroughly.
- Page 5 3. Plug the 3-pin plug into a mains power outlet; do not use an extension lead 4. Connect the short piece of tubing from the ventilator to either outlet of the humidifier chamber, 5. Connect the long piece of tubing from the other outlet of the humidifier chamber to the mask, 6.
-
Page 6: Starting Treatment
The mask shown is for illustration purposes only. Your own mask may differ from this. Starting treatment Turn the humidifier on using the grey button on the right hand side of the front of the humidifier base unit. Once you are comfortable press the button once for ®... - Page 7 The level of humidity is adjustable and is entirely dependant on how comfortable you feel. Use the dial on the front of the humidifier to adjust the level of humidity. If there is excessive moisture in the mask or tubing, the temperature of the humidifier needs to be reduced.
- Page 8 Monthly • Replace inlet filter with new filter. • Wipe down Nippy ® 3+ and humidifier with a damp cloth or clinical wipe Contact us If you experience any problems or have any difficulties with your equipment please call the Lane Fox Unit technical services on 020 7188 3440 (Monday to Friday 8am-5pm) If your query is related to the mask, clinical issue, or an...
Need help?
Do you have a question about the Nippy 3+ and is the answer not in the manual?
Questions and answers