Restore Default Settings; Upgrade Firmware - ActionTec GT701-WG User Manual

Restore Default Settings

To restore the Gateway to its factory default settings, select Restore Default Settings
from the "Utilities" screen. When the "Restore Default Settings" screen appears,
click Restore Default Settings. Any changes made to the Gateway's settings in the
Custom Setup screens will be lost and the factory default settings will be restored.
During this process, the Gateway's Power
N
Warning: Do not unplug the power cord from the Gateway
during the Restore Default Settings process. Doing so may result
in permanent damage to the Gateway.
When the Power Light stops flashing and glows steadily green, the Gateway is fully
operational.

Upgrade Firmware

Selecting Upgrade Firmware in the "Utilities" screen generates the "Upgrade
Firmware" screen. Actiontec periodically posts firmware upgrades to enhance the
Gateway's capabilities. Follow the instructions on-screen to upgrade the Gateway's
firmware.
Chapter 7 Using Utilities
flashes and the Gateway is disabled.
Light
83