Table of Contents
Advertisement
Steps for creating a polyphonic ring tone
1. The first time you enter the Composer menu, you will
see 8 channels that you can select for editing. Each
channel can be used to save one passage of music that
you have created. Scroll to the channel that you wish to
edit, and then press
window to begin composing the music for this channel.
2. Edit notes according to the procedures described above.
•
To modify a note after you have entered several
notes, press
the note that you wish to change. You can then
proceed with adjusting the length, octave, sharp/
unsharp, and so on.
•
Press
to delete a highlighted note.
3. When editing the music in a channel, press
to access the following options:
•
Play: Plays the notes in the channel.
•
Instrument: Allows you select the instrument that
will play the notes in the channel.
•
Time Beat: Sets the tempo (tempo range: 40 to 200).
4. After you are finished editing the notes in the channel,
press
to return to the channel list. You can now
repeat the above steps to create another channel of
music.
to enter the ring tone editing
to move the cursor to the right of
(Option)
Menus
131
Advertisement
Table of Contents
