JUKI J-350QVP Instruction Manual page 11

❷
❸
❹
❻
❷
❺
❶
Panel cord binding procedure
❶ Remove two setscrews from the presser regulator cover.
❶
❷ Arrange the panel cord as illustrated in the figure. Then, secure
❸ Align the notch in the cover with the panel cord.
❹ Fix the presser regulator cover with the setscrews.
❸
❹
CAUTION
Turn OFF the power switch.
Always must be disconnected plug from socket-outlet.
Remove the presser regulator cover.
the cable with a cable clip band.
It is necessary to place the panel cord at a position where the cord
does not come in contact with the mechanical parts.
Installing the eye protection cover
CAUTION
Turn OFF the power switch.
Always must be disconnected plug from socket-outlet.
DANGER
Be sure to install the eye protection cover since the cover protects
eyes from being injured by a fragment of a broken needle.
1. Place eye protection cover ❷ and washer ❸ in the written order
on eye protection cover mounting plate ❶ and fix them with set-
screw ❹ .
2. Install eye protection cover mounting plate ❶ on frame ❻ with
two setscrews ❺ .
– 10 –