When checking the P.C.B.s:
•
Put the rubber sheet and the cloth over this unit, and
place the DAC (1), DAC (2) and NET (1) P.C.B.s on
them. (Fig. 8)
•
Connect G1 on DAC (1) P.C.B., G201 on DAC (2)
P.C.B. and G5002 on NET(1) P.C.B. to the chassis
with a ground lead or the like. (Fig. 8)
•
Reconnect all cables (connectors) that have been
disconnected.
•
When connecting the flexible flat cable, be careful
with polarity.
DAC (2) P.C.B.
NET (1) P.C.B.
P.C.B. をチェックする場合には:
・ 本機の上にゴムシートと布を敷き、その上に DAC
・ DAC (1) P.C.B. の G1、 DAC (2) P.C.B. の G201、 NET (1)
・ 外したケーブル(コネクター)をすべて接続します。
・ フラットケーブルを接続する際、極性に注意してく
Ground lead
リード線
G1
G201
G5002
Ground lead
リード線
Fig. 8
(1) 、DAC(2) 、NET(1)P.C.B. を置きます。 (Fig. 8)
P.C.B. の G5002 をリード線等でシャーシに接続しま
す。 (Fig. 8)
ださい。
DAC (1) P.C.B.
Rubber sheet and cloth
ゴムシー トと布
NP-S2000
13