2007 / 01 / 01
2007 / 01 / 31
7.2.2 SEARCH FACTOR:
There are four ways to search recorded files; TIME, EVENT, BOTH (TIME & EVENT), NONE
7.2.2-1 SEARCH FACTOR – EVENT:
When you select 'EVENT (or BOTH) on SEARCH MODE', subordinate search conditions open;
ALARM / MOTION / EMERGENCY / TIME (Here, the time means "scheduled time recording"
using scheduling feature)
More than two conditions can be selected. In this case, each condition is connected with 'OR'
condition.
7.2.2-2 SEARCH FACTOR – TIME:
7.2.2-3 SEARCH FACTOR – BOTH:'
TIME
0 0 : 0 0
2 3 : 5 9
LIST
After pressing 'SEARCH' button on remote
control, click 'LIST'. The search results will be
listed.
* ALARM: To search recorded files triggered by
alarm-in event.
* MOTION: To search recorded files triggered by
motion
* EMERGENCY: To search recorded files generated
by emergency recording (full recording)
* TIME(scheduled time): To search recorded files
generated by time schedule
To search recorded all files within the specific
period of time.
Enter the time period you wish to search for.
39