WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION: CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE.
FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL...
IMPORTANT SAFEGUARDS READ INSTRUCTIONS -- All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. CLEANING -- Unplug video monitor or equipment from the wall outlet before cleaning.
TABLE OF CONTENTS Features Installation Connections Operating Instructions - Controls Backside Connections User Controls - Menu Operations Specifications OSD Language Chart FEATURES - Go-Anywhere Professional Color LCD Monitor - High Bright, High Quality Picture - NTSC and PAL in Composite and Y/C - Thin and Lightweight, Rugged Metal Cabinets - Many Mounting and Installation Options - Low-Power Consumption-12 volts DC Operation...
INSTALLATION LCD monitors may be mounted in any position or orientation. Considerations for mounting include regard for how the monitor is going to be used, routing of connecting cords, and locations away from heat sources (including direct sunshine on the black case). Mounting hard points include 10-32 inserts.
CONNECTIONS To make a normal connection to the monitor, bring a cord from a camera or other video source to one of the BNC jacks or from a PC to the PC jack on the back of the monitor. Either the left or right BNC jack can be used for input. The other jack may be optionally connected to another user of the same signal.
OPERATING INSTRUCTIONS - Controls Control Buttons, Video Monitor Front. Use a cloth dampened with a mild cleaner to clean the screen. 1. Power On/Off When power is applied, the monitor will come on. This button then turns the monitor on and off. 2.
BACKSIDE CONNECTIONS DC12 V Typical Color LCD Video Monitor Back 1. Input Connector Wall Recessed wiring location for all cables. Place the plug from the supplied table- top power supply into the DC 12V connector. Input at the monitor is 12 volts DC from the TT universal AC supply (100-240 VAC, see specifications table for AC/DC details).
USER CONTROLS - Menu Operations Brightness Contrast Clock Phase Auto H Position V Position RGB Offset Volume Language Input Recall Pushing the MENU button will bring up the Menu shown above. Select the item which you want to adjust using the As shown, the Brightness may be adjusted with the To exit the menu, push the MENU button.
Page 16
Language: English sets the OSD language of the menu to English. Deutsch sets the OSD language of the menu to German. Fran ais sets the OSD language of the menu to French. Italiano sets the OSD language of the menu to Italian. Espa ol sets the OSD language of the menu to Spanish.
Page 17
Sharpness sets the desired sharpening enhancement to the picture. Color adds coloring to the block and white picture content (of a color signal), and is usually set for pleasing faces. Tint adjusts all the colors on the screen, but is most noticeable to the eye in reds and yellows, and is also usually set for pleasing face tones.
SPECIFICATIONS LCD panel Active display area (Diagonal) Pixel format Pixel pitch Color depths Contrast ratio Brightness Viewing angles (L/R/U/D) Light source / Lifetime Response time(tr/td) VIDEO Video Mode Scanning method Video input signals Composite S-video Video connector Composite S-video Termination Audio input connector Audio Amplifier Resolution...
Page 19
User controls OSD Language Power requirement Power consumption DC power connector AC power connector Dimensions Weight Operating temperature Storage temperature Case color Case material Accessories * Design and specifications are subject to change without notice. Bright, Contrast, Tint, Color, Sharpness, etc English / French / German / Italian / Spanish / Polish 12VDC, 3.0A 30 Watts...
Page 20
OSD LANGUAGE CHART English German French No Signal No Signal No Signal NTSC NTSC NTSC Volume Lautstarke Volume Contrast Kontrast Contraste Brightness Helligkeit Luminosite Sharpness Scharfe Nettete Color Frabkontrast Couleur Tint Nuance Tonung Language Sprache Langues English Deutsch Fran ais Motion Mode Motion Mode Motion Mode...
Page 21
BRACKET FEATURES-Optional - Light duty wall & ceiling mount - Adjustable swivel head - Die cast and aluminum - Cable feed through hole conceals wiring - PT 1 threaded pipe - Maximum load 20 lb ( 9.0kg ) The Bracket is light duty wall & ceiling mount designed for use with LCD monitor.
STAND FEATURES In order to install the desk-top stand at LCD monitor properly, First, fix the metal plate provided to LCD monitor with 4 screws of only FH4X6 size only and the desk-top stand to the metal plate with 4 screw of M4 size. Lastly, put the hinge cover on the hole located on the rear side of LCD monitor .