Setting; Focus Adj - American Dynamics ADLCD10PPS1WM User Manual

Setting

1.Press the SET button
ㆍ Settings can now be made. The SETUP menu is displayed on the monitor.
2. Select a menu item from the list available by using the UP and DOWN buttons.
ㆍ Functions are selected using up and down buttons.
ㆍ The selected position is displayed in Yellow.
3. Press the LEFT or RIGHT button to change modes.
ㆍ When the LEFT or RIGHT button is pressed, available values and modes are displayed in order. Keep
pressing the button until you get to the mode you wish to select.
4. Select 'EXIT' and then press the SET button to exit the set up menu.
Note
If mode is selected, it means that there is a sub-menu which can be selected by pressing the SET
button.

Focus ADJ

This function is to adjust the focus of Lens.
15