Mounting The Cs2 - Delta CS2 Technical Information

Mounting the CS2

The CS2 scanner is contained in a enclosure which has
mounting tabs on the bottom. The lighting LEDs shine
through the clear bottom and the optics pick up the
reflected light through the bottom also. The bar graph
display and status indicators can be viewed through the
clear top.
Mount the CS2 so that the object to be scanned is within
the scanning area. In the default configuration, the center
of the scanning range is 1.75" from the bottom of the
scanner. Although the CS2 can see to some extent from
about 1" to about 4", best performance is from 1.5 to 2".
The CS2 will operate in any position. However, in dirty
environments, it is best to have the CS2 looking straight
down, and worst to be looking straight up. If the scanner
must be placed such that it is looking up, a stream of air
may be adequate to keep the window clean.
It is also advantageous to be able to see the indicators
through the clear top of the unit when it is in operation.
CS2
Viewer
LEDs
LEDs
Scanning Range
Object
Various scanning areas and shapes are possible.
Please contact Delta for further information.
Delta Computer Systems, Inc., 11719 NE 95th Street, Vancouver, Washington 98682-2444 (360) 254-8688
Nominal Distance
from Scanner to
object
Background
email@deltacompsys.com http://www.deltacompsys.com
CS2 Color Scanner
Scanning Area Line Orientation
P/N CS2-NR-A1X8-00
Bottom View of CS2
Object
Scanning Area
Top View of Scanned Area
5