Chapter 2. Getting Started; Charging The Battery⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅9 - Innotek MC3000 User Manual

Chapter 2. Getting Started

1. Charging the Battery
Before using the terminal for the first time, charge the Li-ion Battery fully in the terminal until the
battery charging LED turns GREEN. It may take approximately 3 hours. Place your terminal into
the cradle and charge it.
Note: When you first use your terminal, if you remove your battery before it is fully charged, it
may cause malfunction. To ensure the quickest charging time, turn the terminal into a
sleep mode while charging.
To charge the terminal's battery:
① Connect the cradle to a power source.
② Slide in the terminal into the cradle until red LED lights up. For spare battery charging,
stick the battery to charging slot at the top of cradle.
and fully charges in approximately 3 hours.
③ The battery charging LED turns
is completed, LED turns GREEN.
Preliminary Version / January 2005
The terminal starts to charge automatically,
RED
to indicate that the battery is charging. As charging
9