Innotek MC3000 User Manual page 28

③ Dynamic IP
Select Obtain an IP address via DHCP. In this case, wireless communication is unavailable
cause DHCP is not the static IP.
④ Static IP
i) Select Start → Settings → Control Panel, then double tap Network and Dial-up
Connections.
ii) Select an appropriate driver for a built-in Wireless LAN card. For example, this unit is set
up with CISCO.
iii) Select the IP Address tap, and then the Specify an IP address here. Enter the IP
Address, Subnet Mask and Default Gateway data.
iv) Select the Name Servers tap, and enter the appropriate data. Consult the network
manager for the data.
Preliminary Version / January 2005
28