Chapter 4. Operating The Terminal; Using The Stylus⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅14 - Innotek MC3000 User Manual

Chapter 4. Operating the Terminal

1. Using the Stylus
The stylus selects items and enters information. The stylus functions as a mouse.
1) Tap: Touch the screen once with the stylus to open items and select options.
2) Drag: Hold the stylus on the screen and drag across the screen to select text and images.
Drag in a list to select multiple items.
Note: 1. If the surface of the screen becomes soiled, clean it with a soft cloth before using the
stylus pen.
2. Take care not to scratch the screen. When working with your MC3000, use the
supplied pen intended for use with a touch-sensitive screen. Never use an actual pen or
pencil or other sharp object on the surface of the MC3000 screen.
3. Do not leave a child playing with stylus. Body contact with the sharp end could incur
severe injury. Please keep the terminal away from child at all times.
2. Calibrating the Screen
When tapping with the stylus pen does not activate correctly, calibrate the screen. To calibrate
the screen so the cursor on the touch screen aligns with the tip of your stylus:
1) To calibrate your screen, select Start → Settings → Control Panel, then double tap the
Stylus icon.
2) Remove the stylus from its stylus silo on the back of the terminal.
3) Tap the center of each target that appears on the calibration screen with stylus.
Preliminary Version / January 2005
< Picture 3-1. Calibration screen >
14