Starting Up And Temperature Regulationl; Fridge Compartment; Freezer Compartment - AEG S 60362 KG Instruction Book

Starting up and temperature regulation

Fridge compartment

Insert the plug of the connection lead into the plug socket with protective
earth contact.
Turn the knob (E).
Setting "0" means: Off.
Setting "1" means: Highest temperature, (warmest setting).
Setting "4" (end-stop) means: Lowest temperature, (coldest setting).
However, the exact setting should be chosen keeping in the mind that the
temperature inside the refrigerator depends on:
- the quantity of food stored
- how often the door is opened
- ambient temperature
Important!
High ambient temperatures (e.g. on hot summer days) and a cold setting on
the temperature regulator (position "4") can cause the compressor to run
continuously.
If this happens, turn the temperature regulator back to a warmer setting
(position "3" to "4"). At this setting the compressor will be switched on and
off as usual and automatic defrosting recommenced.

Freezer compartment

Please clean the appliance interior and all accessories prior to starting the
appliance. Plug in the appliance at the mains supply.
Turn the temperature regulator (D) in the direction of "1". The red lamp (A)
comes on
Operate the fast-freeze knob (C). The yellow pilot lamp (B) comes on and
the audible warning stops.
Only when the red lamp (A) has gone out should you reset the fast-freeze
knob (C) the yellow light (B) goes out.
Turn the knob (D).
Setting "0": Off.
Setting "1": Highest temperature, (warmest setting).
Setting "4" (end-stop): Lowest temperature, (coldest setting).
The exact setting should be chosen keeping in mind that the temperature
inside the appliance depends on (see Fridge):
Important:
Regularly check on the red temperature pilot lamp (A) that the required
storage temperature is being maintained.
43