Quick Reference; How To Assemble - Electrolux Z2920 Series Owner's Manual

Quick Reference

1 Extension Tube and Crevice Nozzle. (Pull apart.)
2 Dusting Brush.
Hose.
3
Vacuum Cleaner Body.
4
5 Electrical Cord.
Handle.
6
Screws located in the accessory package.
7

How To Assemble

CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts. Make sure ON/OFF switch is
in the OFF position before plugging in.
3 Pull the electrical cord
4
5
Slide the handle into the
1
grooves at the top of the
vacuum body as shown.
Place the two screws
2
(supplied) into the holes at
back of the unit and tighten
with a screwdriver.
up to the cord retainer
and fi rmly push down
into retainer. This will
keep the cord out of the
way the next time you
vacuum.
Wind the cord around
the two cord hooks
on the back of the
vacuum.
Secure plug to the cord
to prevent unwinding.
4
3
1
2
Store the extension
8
tubes on the side
of the vacuum in
front of the hose.
Store the dusting
9
brush on its
holder.
5
6
6 P l a c e t h e h o s e
on the back of the
vacuum, wrapping it
up and over the hose
hook as shown.
F i r m l y p u s h t h e
7
end of the hose into
the hose retainer
in the hood of the
vacuum.
5