Download Print this page
Comcast Custom DVR-3 Device User Manual

Comcast Custom DVR-3 Device User Manual

Advertisement

Quick Links

COMCAST INSTRUCTIONS
You must unlock the remote first. When
doing this procedure, make sure the CABLE
light blinks 4 times. If it only blinks twice, then
do these steps again, until you see it blink 4
times. After it blinks four times, you do not
have to do this unlock instructions again.
UNLOCK INSTRUCTIONS
To unlock CABLE mode (so you can program
the remote to your cable box):
1. Press and release CABLE key.
2. Press and hold SETUP key until CABLE
key blinks twice and goes off.
982
3. Enter code
BLINK 4 TIMES TO CONFIRM CABLE
KEY UNLOCKED.
Once you have completed the unlock
sequence and the CABLE light blinked four
times to confirm unlock, proceed to
programming the CABLE mode:
PROGRAMMING INSTRUCTIONS
Instructions for programming the CABLE
mode button:
Note: Look at the back of your cable box to
find what brand manufactures your unit;
usually Motorola or Scientific Atlanta.
1. Make sure cable box is turned on.
2. Press and release CABLE button.
3. Press and hold SETUP key unit CABLE
light blinks twice and turns off. Release
the key.
4. Type in code (codes are located in
booklet that was provided with your
remote). Mode key will blink twice to
confirm acceptance of the code.
Now try it on cable box. It should be working.
If not, repeat steps 1-4 with the next code in
code list.
; CABLE LIGHT WILL
CODES FOR CABLE SET TO BOXES
WARNING: Find the brand name that is
located on the back of your set-top-box. DO
NOT refer to the brand name located on the
front. If you do not see a brand name on the
back of your box, please try the most
common codes first like 01877 (Scientific
Atlanta), 01376 (Motorola), and 00144
(Samsung).
ABC: 00003, 00008
Americast: 00899
Bell South: 00899
Comcast: 01982
Digeo: 01187
Director: 00476
General Instrument: 00476, 00810, 00276,
00003
GoldStar: 00144
Hamlin: 00009, 00273
Jerrold: 00476, 00810, 00276, 00003
Memorex: 00000
Motorola: 01376, 00476, 00810, 00276,
01187, 01254
Pace: 01877, 00237, 00008
Panasonic: 00000, 00107, 01982
Paragon: 00000
Philips: 01305, 00317
Pioneer: 01877, 00877, 00144, 00533
Pulsar: 00000
Quasar: 00000
Regal: 00279, 00273
Runco: 00000
Samsung: 00144
Scientific Atlanta: 01877, 00877, 00477,
00008
Sony: 01006
Starcom: 00003
Supercable: 00276
Torx: 00003
Toshiba: 00000
Zenith: 00000, 00525, 00899
To program the TV or AUX mode buttons,
refer to the full manual that was provided with
remote.
!

Advertisement

loading

Summary of Contents for Comcast Custom DVR-3 Device

  • Page 1 COMCAST INSTRUCTIONS CODES FOR CABLE SET TO BOXES You must unlock the remote first. When WARNING: Find the brand name that is doing this procedure, make sure the CABLE located on the back of your set-top-box. DO light blinks 4 times. If it only blinks twice, then...
  • Page 2: Installing Batteries

    (on a Scientific at the factory to operate the Cable Box The Comcast Custom DVR 3-Device supplied by your Comcast system, an universal remote will control up to Atlanta Explorer, RCA TV, and an RCA VCR (in the AUX...
  • Page 3: Changing Volume Lock

    SOLUTION: An invalid entry has Turn on your TV. occurred. Check the key On the remote control, press TV With the Comcast DVR remote, you to be entered and try Device Type:______________ once. Then press and hold Setup can easily decide what device you want programming again.
  • Page 4: Manufacturer's Codes

    Samsung 20490, 21470 Koss 20651 Hyundai 10849 Bell South 00899 Sharp 20675 Lenoxx 21127 11990 Sony 21033, 21070, 21431, 21536 Comcast 01982 20591, 20741, 20869 Infinity 10054 Digeo 01187 Sylvania 20675 LiteOn 21058, 21416, 21440 Initial 11990 Zenith 20741 Director...
  • Page 5: Additional Information

    Nikko 20037 Sony 20636 Syntax 11144, 11240, 11331 Niveus Media 21972 Tivo 20618, 20636 The stylized Comcast logo is a regis- Tandy 10093 Northgate 21972 tered trademark in the US Patent and Setup Codes For VCRs Tatung 10055, 11756 Olympus 20035 Trademark Office.