Comcast XR15 Start Manual

1
Meet Your Remote
TV Input
Changes to the next
available input on your TV.
Start
XFINITY / Menu
Access Guide, Saved,
XFINITY On Demand, Apps,
Search, and Settings.
Voice Remote
Back Arrow
Press and release for Last.
Press and hold for 2
seconds to Exit.
Number Keys
Use predictive text (T9) to
quickly search for content.
2
Turn On Your Remote
Your remote arrives with the AA batteries already installed, but not
Mic / Status LED
activated. Here is how to power it on for the first time.
Power
A Pick up your remote and remove
the "Pull" tab on the back by
pulling up on the tab. The Status
LED will blink green four times
Save
as the remote powers up (about 5
Starts recording the
program you are watching seconds).
or saves future programs
to your DVR.
Voice Control
Push and hold to talk.
B Make sure your TV and set-top
Discover content by
box are turned on.
channel, program or
key words.
Info
Displays information
about programs and
notifications.
3
Pair Your Remote for Voice Control
Use Voice Control to search for networks and shows, set DVR recordings,
and get recommendations.
A Press and hold the Xfinity button
and Info button until the status
LED changes from red to green
(about 5 seconds).
You should see the an on-screen
confirmation when the remote
is paired. If you do not see
confirmation, press the Xfinity
button again.
B Once your remote is paired, follow
Pairing
the on-screen instructions to set
Successful up power, volume, and input control
for your TV.
C
Now that your remote is set up,
press and hold the Voice button to
ask "what can i say?" for some voice
command suggestions.
Troubleshooting
FCC Compliance Statement
Remote not working with your TV? This equipment has been tested and found to
The remote has to be programmed
comply with the limits for a Class B digital device,
to the TV and/or audio receiver to pursuant to part 15 of the FCC rules. These limits
control power, volume, and input. Go are designed to provide reasonable protection
to the Remote Settings screen on X1 against harmful interference in a residential
to program control of your TV and installation. This equipment generates, uses, and
audio receiver. can radiate radio frequency energy and, if not used
in accordance with the instructions, may cause
Need help? Say "Remote help" to see harmful interference to radio communications.
tips & tricks for using your remote.
There is no guarantee that interference will not
occur in a particular installation. If this equipment
Voice command not working? Make
does cause harmful interference to radio or
sure you're pressing the Voice button
television reception, the user is encouraged to try
while you speak into the remote, and
to correct the interference by one or more of the
release it when complete.
following measures:
Need to pair with another box? If
• Reorient or relocate the receiving antenna.
you want to use your remote with a • Increase or decrease the separation
different set-top box repeat step 3
between the equipment and receiver.
while pointing the remote at the box. • Connect the equipment into an outlet on a
circuit different from that which the receiver
is connected.
Looking for more information? Visit
• Consult the dealer or an experienced remote
Xfinity.com/remotes for additional
control / TV technician for help.
help with Xfinity remotes
• It is strongly recommended that the TV be
plugged into a separate wall outlet.
The user is cautioned that changes and modifications
made to this equipment without the approval of the
manufacturer could void the user's authority to
operate this equipment.
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
FCC ID: MG3-4352