Advertisement
Comcast Custom DVR
3 Device
User Guide
OVERVIEW
The Comcast Custom DVR 3-Device
universal remote will control up to
three home entertainment devices,
including a Digital Video Recorder
enabled Cable Box (used by Comcast
Systems).
The remote control requires installing
two (2) new AA batteries (included)
and some easy programming to con-
trol your devices. For best results,
please read and perform all instruc-
tions listed here. Also, keep this guide
for future reference.
INSTALLING BATTERIES
1.
Pull back the remote control' s
battery cover and remove it.
2.
Insert the two (2) supplied AA
batteries according to the + and
- marks in the battery case.
3.
Push the battery cover back into
place.
4.
Test the unit by pressing any
mode key (i.e., AUX, TV, or
Cable).
If batteries are inserted correctly,
the selected mode key will light.
NOTE: When batteries need replacement,
the remote control will stop operating.
Replace the old batteries and the unit will
be restored to its full functionality, complete
with your favorite settings.
FEATURES AND
FUNCTIONS
Use the remote control' s mode keys
(i.e., AUX, TV, or Cable) to control
a specific device. When pressed, the
selected mode key will light, confirm-
ing your choice. Use the other keys to
perform desired actions (see the fol-
lowing key chart).
NOTE: The selected mode will remain
active until you press another mode key.
Press AUX, TV, or
Cable once to select
and control a device.
Press Power once to
turn on or off the
selected home enter-
tainment device.
Use Setup for all
programming
sequences.
Press All On once to
turn on or off all
programmed devices
in this order: Cable,
TV, and AUX. After
all devices are on,
Cable is the active
mode.
Press ON DEMAND
once to access
Comcast' s ON
DEMAND menu (not
available in all areas).
In the AUX or TV
mode, use the trans-
port keys to control a
VCR, PVR, or DVD
player. To record a
program on a VCR,
press REC twice.
In the Cable mode,
use the keys to control
ON DEMAND pro
grams.
Press REPLAY to
replay the previous
few seconds of a pro
gram.
Press My DVR to
show a list of prog
rams that have been
recorded.
Press LIVE to return
to watching live TV.
Use A, B, or C to
access interactive
functionality on your
cable box.
Use Page+ (or Page–)
to page up (or down)
through menu screens
and the interactive
program guide.
Use Guide to display
the interactive
program guide.
Use these keys to
move the cursor in
the interactive pro-
gram guide and menu
screens.
Use OK (Select) to
select menu options,
PPV events, and
programs from the
interactive program
guide.
Use Info to display
current channel and
program information.
Use Menu to display
PROGRAMMING DEVICE
the Quick Menu (on a
CONTROL
Motorola Cable Box),
The Comcast Custom 3-Device univer-
or to access settings
sal remote control is preprogrammed
(on a Scientific
at the factory to operate the Cable Box
supplied by your Comcast system, an
Atlanta Explorer,
RCA TV, and an RCA VCR (in the AUX
Pioneer Voyager, or
mode). To control devices other than
PACE cable box).
default brands (excluding the Cable
Box), perform the below steps; other-
Use Exit to exit the
wise skip this section:
menu or guide.
1.
Turn on a device (e.g., VCR or
Use Help to access
digital cable help.
Use Last to recall the
last channel or go back
one screen in the menu.
Use VOL+ (or VOL-)
to raise (or lower) the
sound volume. Also
2.
On the remote control, press a
see Changing Volume
Lock.
Press Mute once to
turn sound off or on.
In the Cable mode,
press FAV once to
3.
Press and hold Setup until the
display programmed
favorite cable channels.
Use CH+ (or CH-) to
4.
Locate the code for your device
select the next higher
(or lower) channel.
When controlling a
DVD player, use CH+
(or CH-) to skip
5.
Enter the first five-digit code for
forward (or skip
reverse) through
video.
Use the keypad (0 ~
9)to directly select the
channels (e.g., 09 or
031).
In the TV mode, use
this key to switch the
TV' s input to view TV
or video programs.
In the AUX mode,
use this key to switch
the VCR, PVR (or
DVR), or DVD player
to view TV or video.
For an audio device,
use it to switch to an
input source.
Use HD/ZOOM
to change the aspect
Ration on HD
Receivers.
Use the PIP Function
keys to operate the
PIP functionality of
your converter and
TV (If Available)
DVD Player) and, if applicable,
insert media, (e.g., video cassette or
disc).
NOTE: Please read steps 2 to 6 com-
pletely before proceeding. Highlight or
write down the codes and device you
wish to program before moving on to
step 2.
device key once (i.e., AUX or TV).
AUX
NOTE: Use the
key to program
control of an Audio Amplifier or
Receiver, a DVD Player, a Home-
Theater-In-A-Box Device, a PVR (or
DVR), or a VCR.
selected mode key blinks twice,
then release Setup.
in Manufacturer' s Codes on the
back of this user guide. Brands are
listed in alphabetical order with
the most popular codes listed
first.
your device. If you perform this
procedure correctly, the selected
mode key will blink twice.
Advertisement
