Advanced Bios Features - MSI MS-7521 Getting Started

M S-7521 M ainboard

Advanced BIOS Features

BIOS Flash Protection
W hen enabled, the BIOS' data cannot be changed when attempting to update the
BIOS with a Flash utility. To successfully update the BIOS, you'll need to disable this
Flash BIOS Protection function. You should enable this function at all times. The only
time when you need to disable it is when you want to update the BIOS. After updating
the BIOS, you should immediately re-enable it to protect it against viruses.
Full Screen Logo Display
This item enables this system to show the company logo on the boot-up screen.
Settings are:
[Enabled] Shows a still image (logo) on the full screen at boot.
[Disabled] Shows the POST messages at boot.
Quick Power On Self Test
Select [Enabled] to reduce the amount of time required to run the power-on self-test
(POST). A quick POST skips certain steps. We recommend that you normally disable
quick POST. Better to find a problem during POST than lose data during your work.
Boot Up Num-Lock LED
This setting is to set the Num Lock status when the system is powered on. Setting to
[On] will turn on the Num Lock key when the system is powered on. Setting to [Off]
will allow users to use the arrow keys on the numeric keypad.
APIC Function
This field is used to enable or disable the APIC (Advanced Programmable Interrupt
Controller). Due to compliance with PC2001 design guide, the system is able to run in
APIC mode. Enabling APIC mode will expand available IRQ resources for the system.
3-8