Care And Cleaning; Technical Data; Installation - Electrolux ENA38733X User Manual

8 electrolux

CARE AND CLEANING

Caution! Unplug the appliance before
carrying out any maintenance operation.
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by authorized
technicians.
Defrosting of the refrigerator
Frost is automatically eliminated from the evapo-
rator of the refrigerator compartment every time
the motor compressor stops, during normal use.
The defrost water drains out through a trough in-
to a special container at the back of the appli-
ance, over the motor compressor, where it evap-
orates.
It is important to periodically clean the defrost wa-
ter drain hole in the middle of the refrigerator com-
partment channel to prevent the water overflow-
ing and dripping onto the food inside. Use the spe-
cial cleaner provided, which you will find already
inserted into the drain hole.

TECHNICAL DATA

Dimension
Rising Time
The technical information are situated in the rat-
ing plate on the internal left side of the appliance
and in the energy label.

INSTALLATION

Caution! Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the ambi-
ent temperature corresponds to the climate class
indicated on the rating plate of the appliance:
Height
Width
Depth
Defrosting of the freezer
The freezer compartment of this model, on the
other hand, is a "no frost" type. This means that
there is no buildup of frost when it is in operation,
neither on the internal walls nor on the foods.
The absence of frost is due to the continuous cir-
culation of cold air inside the compartment, driv-
en by an automatically controlled fan.
ENA34733X
ENA34733W
1850 mm
595 mm
648 mm
18 h
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
ENA38733W
ENA38733X
2010 mm
595 mm
648 mm
18 h