Configuring The Maximum-Aging Time - Cisco Catalyst 2960-XR Configuration Manual

Configuring the Maximum-Aging Time

DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2 spanning-tree mst forward-time seconds
Example:
Switch(config)# spanning-tree mst
forward-time 25
Step 3 end
Example:
Switch(config)# end
Related Topics
Specifying the MST Region Configuration and Enabling MSTP, on page 59

Configuring the Maximum-Aging Time

Beginning in privileged EXEC mode, follow these steps to configure the maximum-aging time for all MST
instances. This procedure is optional.
Before You Begin
A multiple spanning tree (MST) must be specified and enabled on the switch. For instructions, see Related
Topics.
SUMMARY STEPS
1. configure terminal
2. spanning-tree mst max-age seconds
3. end
Catalyst 2960-XR Switch Layer 2 Configuration Guide, Cisco IOS Release 15.0(2)EX1
70
Configuring Multiple Spanning-Tree Protocol
Purpose
Enters the global configuration mode.
Configures the forward time for all MST instances. The forwarding
delay is the number of seconds a port waits before changing from
its spanning-tree learning and listening states to the forwarding
state.
For seconds, the range is 4 to 30; the default is 20.
Returns to privileged EXEC mode.
OL-29424-01