Shown here is the 'standard' setting
Here the tine section is angled
by changing the bolt hole used.
Here the rake angle is varied
06-2011
2011 699-40' Disc Cultivator Assembly and Parts Manual
Harrow Tine Settings
For better trash flow, the tines are adjustable in 2 ways:
This set of holes is the 'standard' setting.
1"
3/4"
Using this set of holes will vary the rake angle
as shown above.
Salford Farm Machinery Ltd.
This Angle-Iron has two
sets of holes.
1"
5/8"
use bottom bolt
hole for
'standard' setting.
use top bolt
hole to
angle tines
FRONT
Return to Contents
Page 55