Dell EqualLogic PS4110 Hardware Owner's Manual page 7

Hardware Owner's Manual 1 Basic Storage Array Information
Removing the Bezel
The steps for removing the bezel are the same for all array models.
1. Using the bezel key, unlock the bezel.
2. Holding the bezel, lift the latch on the left side of the bezel and swing the left side away from the array.
3. Lift the right side of the bezel off the right side of the array.
4. Set the bezel aside.
Installing the Bezel
The steps for installing the bezel are the same for all the array models.
1. Hook the right end of the bezel onto the right side of the chassis.
2. Swing the left end of the bezel towards the left side of the chassis.
3. Press the bezel into place until the release latch closes.
4. Using the key provided, lock the bezel and store the key in a safe place.
Figure 2: Installing the Bezel
Front-Panel Features and Indicators
The front of a PS4110, without the bezel, is shown in Figure 3 and Figure 4.
3