Dell EqualLogic PS4110 Hardware Owner's Manual page 36

Hardware Owner's Manual
This is considered an advanced configuration, available if your environment requires this level of security.
Note:
Hardware Steps
1. Make sure your network environment can support a dedicated management network, with a subnet that is
separate from the subnets for iSCSI traffic.
2. On both control modules, connect the port labeled MANAGEMENT to the management network. The
location of the management port is shown in the following figure.
Software Steps
See the PS Series Group Administration guide for the procedure to configure the management network in the
Group Manager GUI.
32
Figure 22: Management Port Location
3 Maintaining Control Modules