Dell EqualLogic PS4110 Hardware Owner's Manual page 19

Hardware Owner's Manual
1. Remove the bezel. See
2. Press the release tab and slide the drive blank out until it is free of the drive bay. See
Figure 12: Removing and Installing a 3.5-Inch Hard-Drive Blank
Figure 13: Removing and Installing a 2.5-Inch Hard-Drive Blank
Installing a Drive Blank
1. Remove the bezel. See
2. Insert the drive blank into the drive bay until the blank is fully seated.
3. Attach the bezel.
Removing the Bezel on page
Item Description
1 Drive blank
2 Release tab
Removing the Bezel on page
3.
3.
2 Maintaining Drives
Figure 12 or Figure 13.
15