odd-i N700D User Manual page 54

Rear Monitoring Camera
0
2
To Run Rear Monitoring Camera / To Exit Rear Monitoring Camera
▶ To Run the Rear Monitoring Camera Program
If the Rear Monitoring Camera signal is received
when the unit is in the Main Menu status, the External
Input program is started. If another program was
running, it is terminated and the External Input
program is started.
When the program is launched, the Preview screen
appears.
▶ To Start a Recording
Press the 'REC' button in the Preview screen. The
currently displayed video is recorded and the
recording information is displayed at the Control Bar
at the bottom.
- You cannot run a program other than Navigation
when External Input is selected.
▶ To Save a Recording
Press the 'STOP' button. The recording is stopped.
When a window asking you if you want to save the
recording appears, press the 'Yes' button.
- The recorded file is saved in the hard disk drive
only.
Save Path: /Record/Rearcam/RearXXX.avi
▶ When the Rear Monitoring Camera signal
disappears
If the Rear Monitoring Camera signal disappears
during preview, the 'Rear Monitoring Camera signal
does not exist' message appears and the External
Input program is terminated.
If this happens during a recording, the recorded file is
saved, the 'Rear Monitoring Camera signal does not
exist' message appears, and the External Input
program is terminated.
54
odd-i N700D User Guide