odd-i N700D User Manual page 14

Installing the Product
Installing and Removing an SD Card
1. To Remove: Push the edge of the card slightly inwards. It will then pop up. Pull it out with your
fingers.
2. To Insert: Insert the SD card and push it in until it clicks.
Installing the Cradle
1. Wash the inner surface of your windscreen with a wet towel or tissue.
2. Assemble the product to the cradle by fastening the cradle screw.
3. To install on the windscreen, push the housing onto the windshield and pull the lever down.
4. If the installation position is not quite right, pull the lever up, adjust the position, and then pull it
down again.
※ For your safety, use the product above the dashboard.
14
odd-i N700D User Guide