Kipor KPEC Series User Manual page 27

KPD100 control panel
1. Key functions
Stop/param
eter－ key
Manual
startup/para
meter+ key
Auto/param
eter
increase
key
Manual/par
ameter
saving key
The operating mode is automatically turned into "MAN mode
initialized.
KPD100 controller has the function of protection.
When fault occurs:
· System outputs alarm signals, the corresponding LED indicator turns on or winks.
The relative data of KPD100controller and ATS switching data:
2. Engine
Fig.3-21 KPD100 control panel
Press the key to stop the running generator at running state and
reset the alarm at alarming state.
Press this key to choose －for parameters when at "Parameter set"
mode.
Press the key to start the still generator under manual mode.
Press this key to choose +for parameters when at "Parameter set"
mode.
Press the key to set the generator to be under "AUTO mode".
Press this key to increase parameters when at "Parameter set" mode,
equal to "+"
The key is to set the generator to be under "MAN mode".
Press it to switch the load between power when at manual mode.
Press it under parameter configuration mode can save the parameter
value. It equals to "ok".
" after KPD100 controller
27