Advertisement
TK-3260EX
Note:
• The data stored in the personal computer must match
Model Name and Model Type when it is written into EE-
PROM.
• Do not press the [PTT] key during data transmission or
reception.
3-3..KPG-36/KPG-36A.Description
.......(PC.programming.interface.cable:.Option)
The KPG-36/36A is required to interface the transceiver
with the computer. It has a circuit in its D-sub connector
(KPG-36: 25-pin, KPG-36A: 9-pin) case that converts the
RS-232C logic level to the TTL level.
The KPG-36/36A connects the SP/MIC connector of the
transceiver to the RS-232C serial port of the computer.
3-..KCT-53U.Description.(USB.adapter:.Option)
The KCT-53U is a cable which connects the KPG-36A to a
USB port on a computer.
When using the KCT-53U, install the supplied CD-ROM
(with driver software) in the computer. The KCT-53U driver
runs under Windows 2000 or XP or Vista(32bit).
3-5..FPU.(Programming.Software).Description
The FPU is the programming software for the transceiver
supplied on a CD-ROM. This software runs under Windows
2000 or XP or Vista(32bit).
The software on this disk allows a user to program the
transceiver via Programming interface cable (KPG-36/36A).
3-6..Programming.with.PC
If data is transferred to the transceiver from a PC with the
FPU, the data for each set can be modified.
Data can be programmed into the EEPROM in RS-232C
format via the SP/MIC Connector.
List of FPU for transceiver
Model
Type
TK-3260EX
E
REALIGNMENT
FPU
KPG-123D
PC
KPG-123D
PC
PC
D-SUB
D-SUB
(25-pin)
(9-pin)
KPG-36
KPG-36A
Transceiver
Transceiver
Fig..1
KPG-36 or KPG-36A or
KPG-36A + KCT-53U
Illustration is KPG-36.
PC
USB
KCT-53U
KPG-36A
Transceiver
Advertisement
