When the battery is low, 'LOW BATTERY' will appear on the screen.
ATTACHING THE BELT CLIP
Attach the belt clip as shown below:
To detach, spread the "arms" of the
belt clip and remove.
TIP If you cannot remove the clip
using your hand, use a thin blunt
object such as a screwdriver (not
supplied), taking care not to scratch
the handset surface.
BASIC FUNCTIONS
MAKING AND RECEIVING CALLS
To make a call:
•
Touch
and wait for a dial tone.
•
Enter destination phone number using numbers 0 - 9. If you make an error, touch
to cancel.
To pre-dial a call:
•
Enter destination phone number using numbers 0 - 9. If you make an error, touch
to cancel or touch
•
You can touch
screen to indicate where the pause will occur.
•
Touch
to dial.
To answer a call:
•
Remove the handset from the base unit and touch
NOTE When making or answering calls, bring the top of handset (receiver) to your ear before
speaking. Once the receiver has made contact with your ear, the unit's Smart Key Lock
function will automatically lock the handset keys and you may bring the bottom of the handset
(microphone) closer to your lips and speak into the microphone. Handle the handset with
care to avoid accidentally triggering the keys. If you encounter difficulties, use the manual
Key Lock feature (see the SMART KEY LOCK section in this manual on
to delete numbers and re-enter.
to insert a 2-second pause while dialing. 'P' will appear on the
10
.
Page XX
for more