Electrolux ERT14002W User Manual page 48

48 electrolux
Warning! It must be possible to
disconnect the appliance from the
mains power supply; the plug must
therefore be easily accessible after
installation.
Door reversibility
Important! To carry out the following
operations, we suggest that this be made
with another person that will keep a firm
hold on the doors of the appliance during
the operations.
To change the opening direction of the
door, do these steps:
1. Remove the plug from the power socket.
2. Tilt back the appliance carefully so that
the compressor cannot touch the floor.
3. Unscrew both adjustable feet.
4. Unscrew the screws of the door bot-
tom hinge. Remove the hinge. Put over
the pin in the direction of the arrow.
5. Unscrew and install the screw on the op-
posite side.
6. Install the hinge on the opposite side.
7. Screw both adjustable feet.
8. Unscrew both screws on the rear side.
9. Push back the top and lift it from the fix-
ing elements.
10. Unscrew the screws of the door top
hinge.
11. Remove the hinge. Put over the pin in
the direction of the arrow. Install the
hinge on the opposite side.
12. Tighten the hinge.
13. Put the top in position.
14. Pull it forward.
15. Screw both screws on the rear side.