Automatic Door Control (Adc) - Electrolux RH 137D Manual

5.5

Automatic Door Control (ADC)

The following descriptions only apply to devices with ADC.
Using a red dot in the display window (A, point 3), the ADC shows that
the miniBar´s door has been opened.
1. Open the miniBar, check its contents and - if applicable- stock it up
again.
2. Close the miniBar.
RH356
3. Insert ADC key and turn to the
right.
4. Remove ADC key.
5.5.1
Automatic Door Control (electrical)
When the miniBar is opened, a magnetically operated approximation switch
located underneath on the fridge is activated (FIG 1.)
Depending on the connection (opening/closing mechanism), an electric
circuit is closed or opened. Accordingly, this is registered and processed at
the hotel reception. Note: Electrical rating!
2.
A
1.
The red dot has disappeared now.
1= terminal strip
2= approximation switch
A= blue (opening mechanism)
B= black (closing mechanism)
C= white
11
All other models
A
3. Insert ADC key and turn to the
left.
The miniBar´s wiring connection is
situated at the rear of the appliance and
consists of a 3-pin terminal strip (1).
FIG.1
2.
1.