Delete The Records - Salter BPW-9101-GB Instructions For Use Manual

DATA MANAGEMENT

Delete the Records

If you did not get the correct measurement, you can delete
all results by following steps below.
1. In the memory mode, hold pressing "MEM"
button for 3 seconds, the flash display "dEL All"
will show.
2. Press "MEM" to confirm deleting , the LCD displays "
dEL dOnE" and the monitor will turn off.
Note: To exit out of delete mode without deleting
any records, press "START/STOP" button before
pressing "MEM" to confirm any delete commands.
3. If there is no record, the right display will show.
13