Emc Guidance - Salter BPW-9101-GB Instructions For Use Manual

EMC GUIDANCE

1. This product needs special precautions regarding EMC and needs to be installed and put into service according to the
EMC information provided, and this unit can be affected by portable and mobile RF communications equipment.
2.* Do not use a mobile phone or other devices that emit electromagnetic fields, near the unit. This may result in incorrect
operation of the unit.
3. Caution: This unit has been thoroughly tested and inspected to assure proper performance and operation!
4.* Caution: This machine should not be used adjacent to or stacked with other equipment and that if adjacent or stacked
use is necessary, this machine should be observed to verify normal operation in the configuration in which it will
be used.
EMC GUIDANCE
Table 1
Guidance and manufacture's declaration – electromagnetic emission
The device is intended for use in the electromagnetic environment specified below. The customer or the user of the
device should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emission
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Compliance
The device uses RF energy only for its internal function.
Group 1 Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
The device is suitable for use in all establishments,other
Class B
than domestic and those directly connected to the public
low-voltage power supply network that supplies buildings used
for domestic purposes.
Class A
Complies
21
Electromagnetic environment - guidance