Delete The Records; Information For User; Tips For Measurement; Maintenance - Salter BPA-9201-EU Instructions And Guarantee

Delete the records

If you did not get the correct measurement, you can delete all
results by following steps.
1. Hold pressing "MEM" for 3 seconds when the monitor is in
the memory recall mode ,the flash display will show.
2. Press "SET" to confirm deleting and the monitor will turn
off.
3. If you don't want to delete the records, press "START/STOP"
to escape.
4. If there is no record, the above display will show.

INFORMATION FOR USER

Tips for Measurement

Measurements may be inaccurate if taken in the following
circumstances.
Within 1 hour after dinner
or drinking
Within 20 minutes after
taking a bath
In a very cold environment

Maintenance

In order to get the best performance, please follow the
instructions below.
Put in a dry place and
avoid the sunshine
Avoid intense shaking and
collisions
Using wet cloths
to remove dirt
10 I GB
Immediate measurement
after tea, coffee, smoking
When talking or moving
your fingers
When you want to discharge
urine
Avoid touching water,
Avoid dusty and unstable
temperature environment
Do not attempt to clean the
reusable cuff with water and
never immerse the cuff in water.