Loading The Laundry - Smeg TLS 6 Instruction Manual

Loading the laundry

1. Open the machine lid by pulling it upwards.
2. Open the drum by pressing the push button (pictures
"1a" or "1b" - depending on model).
3. Place the items of laundry into the drum one by one.
Do not exceed the maximum load of the programmes
indicated in the separate programme chart.
Notes:
- Overloading the machine will result in unsatisfactory
washing results and creased laundry.
- Take care that the laundry does not overhang the
drum; if this is the case, push the laundry down into
the drum so that there is enough free space to close
the drum flaps properly.
- Do not use the flaps to push the laundry into the
drum.
4. To close the drum, hold both doors in the middle again
(picture "2").
ATTENTION: make sure that the drum flaps are
properly locked - depending on the model:
- the metal hook must be completely hooked into the
rear door flap - see picture "2a", or
- all metal hooks must be properly hooked inside the
rear door flap, and the button must overlap the edge
of the rear door flap - see picture "2b".
- check that no laundry gets stuck between the flaps,
or between flaps and drum.
GB 6
1a
1b
2
2a
2b