Loading The Laundry - Smeg STL 60 Owner's Manual

Loading the laundry

1. Open the machine lid.
2. Open the drum by pressing the small flap (2a) or the
push button (2b) - depending on model - and holding
the large flap. For the drum opening shown on 2c, you
just have to press the push button, without holding the
large flap.
3. Place the items of laundry in the drum one by one
without compressing them. Follow loads
recommended in the "programme chart": overloading
will result in unsatisfactory washing results and creased
laundry.
4. To close the drum, hold both doors in the middle
again.
ATTENTION: Make sure that the drum flaps are
properly locked (for model as shown on photo 2c:
the button must protrude out beyond the edge
of the big door flap)
GB 5
1
2a
2b
2c
3