How To Use The Advanced Functions - Beko RG57K7(B)/BGEF User Manual

6

How to use the advanced functions

1. Sleep function
The SLEEP function is used to decrease energy use while you sleep (and don t need the same
temperature settings to stay comfortable). This function can only be activated via remote control.
C
Note: The SLEEP function is not available in Fan or Dry mode.
2. Turbo function
The Turbo function makes the unit work extra hard to reach your present temperature in the shortest
amount of time possible.
• When you press the Turbo button in Cool mode, the unit will blow cool air with strongest wind
setting to jump-start the cooling process.
• When you press the Turbo button in Heat mode, for units with Electric heat elements, the Electric
Heater will activate and jump-start the heating process.
3. Self clean+ function
Airborne bacteria can grow in the moisture that condenses around heat exchangers in the unit. With
regular use, most of this moisture is evaporated from the unit. By pressing the Self Clean+ button,
your unit will clean itself automatically. The cleaning cycle takes 30 minutes, after which the unit will
turn off automatically. Pressing the Self Clean+ button mid-cycle will cancel the operation and turn
off the unit.
You can use Self Clean+ as often as you like.
C
Note: You can only activate this function in Cool or Dry mode.
4. Shortcut function
• Used to restore the current settings or resume previous settings.
• Push this button when remote controller is on, the system will automatically revert back to the
previous settings including operating mode, setting temperature, fan speed level and sleep feature
(if activated).
• If pushing more than 2 seconds, the system will automatically restore the current operation settings
including operating mode, setting temperature, fan speed level and sleep feature (if activated ).
20 / 44 EN
Air conditioner remote control / User Manual