Table of Contents
Advertisement
A
NEUVIDEO
FRONT PANEL
SERVICE PORT:
This port is used for logo upload, EDID upload and firmware updates.
q
POWER LED:
This LED will illuminate to indicate the unit is on and receiving power.
w
MODE BUTTON:
Press the button to toggle between Scaler Mode and Rotation Mode.
e
SCALE LED:
This LED will be illuminated when the unit is in Scaler Mode.
r
ROTATE LED:
This LED will be illuminated when the unit is in Rotation Mode.
t
ASPECT RATIO & WARPING ON/OFF BUTTON:
y
• Scaler Mode: Press to switch between the available output aspect ratios (Full, 4:3, 16:9, 16:10).
• Rotation Mode: Press to turn Warping Mode on or off.
AUDIO MUTE BUTTON:
u
VIDEO STILL & 360° ROTATE BUTTON
i
• Scaler Mode: Press to freeze the video output.
Note: Audio will continue to play while the video is frozen.
• Rotation Mode: Press to enter automatic 360° rotation mode and toggle through the available rotation directions and speeds (slow
counterclockwise, slow clockwise, fast counterclockwise, fast clockwise, stop).
Note: Activating 360° rotation will disable Warping Mode.
OSD INFO. & 45° ROTATE BUTTON
o
• Scaler Mode: Press to display information about the unit on the OSD including details about video, audio and Ethernet.
• Rotation Mode: Press to rotate the output video in 45 degree increments. Press and hold this button to display the OSD Info screen.
Note: Activating 45° rotation will disable Warping Mode.
Press to mute or unmute the audio output.
PANEL DESCRIPTIONS
3
Advertisement
Table of Contents
