Related Manuals for A-Neuvideo ANI-HDROTATE
Summary of Contents for A-Neuvideo ANI-HDROTATE
- Page 1 ANI-HDROTATE HDMI VIDEO WALL ROTATION PROCESSOR A-NeuVideo.com Frisco, Texas 75036 AUDIO / VIDEO MANUFACTURER...
- Page 2 SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
-
Page 3: Table Of Contents
The information in this manual has been carefully checked and • ANI-HDROTATE HDMI Video Wall Rotation Processor is believed to be accurate. We assume no responsibility for any • 5V/2.6A DC Power Adapter infringements of patents or other rights of third parties which may •... -
Page 4: Introduction
INTRODUCTION The ANI-HDROTATE HDMI Video Wall Rotation Processor is capable of scaling and rotating the input source to nearly any angle and size desired. Its the ideal solution for presenting sources across the unique video display arrangements often found in commercial displays, control rooms, or classrooms. -
Page 5: Front Panel
NEUVIDEO PANEL DESCRIPTIONS FRONT PANEL SERVICE PORT: This port is used for logo upload, EDID upload and firmware updates. POWER LED: This LED will illuminate to indicate the unit is on and receiving power. MODE BUTTON: Press the button to toggle between Scaler Mode and Rotation Mode. SCALE LED: This LED will be illuminated when the unit is in Scaler Mode. -
Page 6: Back Panel
NEUVIDEO PANEL DESCRIPTIONS BACK PANEL OUT PORT: Connect to an HDMI TV, monitor or amplifier for digital video and audio output. IN PORT: Connect to HDMI source equipment such as a media player, game console or set-top box. RS-232 PORT: Connect directly to a PC, laptop or other serial control device to send RS-232 commands to control the unit. -
Page 7: Rs-232 & Telnet Control
NEUVIDEO RS-232 & Telnet Control RS-232 Protocol SIGNAL GENERATOR REMOTE CONTROL ASSIGNMENT ASSIGNMENT Baud Rate: 115200bps Data Bits: 8 Parity: None Flow Control: None Stop Bit: 1 Telnet Control Before attempting to use Telnet control, please ensure that both the unit and the PC/laptop are connected to the same active network. To Access Telnet In Windows XP Click Start, type “cmd”... -
Page 8: Rs-232 & Telnet Commands
NEUVIDEO RS-232 & Telnet Commands RS-232 & Telnet Commands COMMAND DESCRIPTION AND PARAMETERS GET FW VER 8 Show the unit’s current firmware version. SET FACTORY DEFAULT 8 Reset the unit to the factory defaults. Set the EDID to be used by the HDMI input. SET IN A EDID N1 8 Available values for N1: [FHD/2CH]... - Page 9 NEUVIDEO RS-232 & Telnet Commands COMMAND DESCRIPTION AND PARAMETERS Set the unit’s netmask address. SET NETMASK N1 8 N1 = x.x.x.x [x = 0 ~ 255, Netmask] GET NETMASK 8 Show the unit’s current netmask. Set the unit’s gateway address. SET GATEWAY N1 8 N1 = x.x.x.x [x = 0 ~ 255, Gateway]...
- Page 10 NEUVIDEO RS-232 & Telnet Commands COMMAND DESCRIPTION AND PARAMETERS Set the output resolution to use for the HDMI output using the universal timing number. SET OUT A TIMING N1 8 Available values for N1: [Native] [480p@60Hz] [720p@60Hz] [1080p@60Hz] [576p@50Hz] [720p@50Hz] [1080p@50Hz] [1080p@24Hz] [1080p@25Hz]...
- Page 11 NEUVIDEO RS-232 & Telnet Commands COMMAND DESCRIPTION AND PARAMETERS Set the color temperature of the video source. SET IN A TEMPERATURE N1 8 Available values for N1: [6500K] [9300K] Note: Scaler Mode only. GET IN A TEMPERATURE 8 Show the current color temperature setting for the video source. Enable or disable horizontally flipping the video source.
-
Page 12: Video Wall Control Software
NEUVIDEO VIDEO W ALL CONTROL SOFTW ARE The Video Wall Control software provides complete control over the Video Wall Rotation Processor via Ethernet or RS-232. This software can scan the local network, as well as any RS-232 connections on the PC, for controllable units to add to the current video wall grouping. Multiple video wall configurations can be stored in the software for quick local recall, or the configurations can be exported as a file for use in other video wall deployments. - Page 13 NEUVIDEO VIDEO W ALL CONTROL SOFTW ARE ■ SELECTED UNITS: All selected units will appear here with an ID number indicating their order to be added to the layout. If you wish to re-order the units, type new ID numbers next to each unit and click “Arrange”. To remove an individual unit from the list, click the “X”...
- Page 14 NEUVIDEO VIDEO W ALL CONTROL SOFTW ARE Rotation Mode Configuration The “I/O” tab in Rotation Mode provides control over input and output functions such as EDID selection, audio/video mute, OSD Information, and custom graphics overlay. To return these settings to their factory defaults, click on the “Default” button. The “General” tab provides control over the network configuration, and provides a way to initiate a firmware update or perform a factory reset.
- Page 15 NEUVIDEO VIDEO W ALL CONTROL SOFTW ARE Scaler Mode Configuration The “I/O” tab in Scaler Mode provides control over input and output functions such as EDID selection, audio/video mute, OSD Information, customized text overlay, and customized graphics overlay. To return these settings to their factory defaults, click on the “Default” button. 1.
- Page 16 NEUVIDEO VIDEO W ALL CONTROL SOFTW ARE Pre-Defined Video W all La youts The position, size and angle of the display connected to each unit is set in the Layout window when in Rotation Mode. If you are currently in the Setting window, clicking on the “Layout” button in the upper- left “Common” section of the window will switch back to the Layout window and activate Rotation mode.
- Page 17 NEUVIDEO VIDEO W ALL CONTROL SOFTW ARE Customized Video W all La youts The position, size and angle of the display connected to each unit is set in the Layout window when in Rotation Mode. If you are currently in the Setting window, clicking on the “Layout” button in the upper- left “Common” section of the window will switch back to the Layout window and activate Rotation mode.
- Page 18 NEUVIDEO VIDEO W ALL CONTROL SOFTW ARE 1. UNIT INFORMATION AND DETAILS: This section displays all of the relevant position, dimension, and orientation details of the selected unit/ display. Note: Only one unit’s details will be displayed if multiple units are currently selected. ■...
- Page 19 NEUVIDEO VIDEO W ALL CONTROL SOFTW ARE the original source (before being split) is 4K (3840x2180). Click “OK” to accept the new zone configuration and return to the main layout window. To arrange the displays used in a specific zone, select the zone from the dropdown and then add the displays that belong to that zone (via the “Search”...
-
Page 20: Video / Audio / Cable Specifications
NEUVIDEO Video / audio / cable Specifications Video Specifications Audio Specifications HDMI INPUT/OUTPUT SCALER MODE LPCM SUPPORTED RESOLUTIONS (HZ) INPUT OUTPUT Max Channels 8 Channels 640x480@60/72/75/85 Sampling Rate (kHz) 32, 44.1, 48, 88.2, 96, 176.4, 192 800x600@56/60/72/75/85 BITSTREAM 1024x768@60/70/75/85 ... -
Page 21: Connection Diagram
NEUVIDEO CONNECTION DIAGRAM CONNECTION DIAGRAM BASIC SCREEN ARRAY SYSTEM... - Page 22 NEUVIDEO CONNECTION DIAGRAM CONNECTION DIAGRAM ADVANCED SCREEN ARRAY SYSTEM...
- Page 23 NEUVIDEO CONNECTION DIAGRAM CONNECTION DIAGRAM 4K QUAD-ZONE SCREEN ARRAY SYSTEM...
- Page 24 BY, THROUGH OR UNDER A-NeuVideo, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions. If you do not agree to these Terms and Conditions, do not use the Product and return the Product to A-NeuVideo, Inc. at the return address set forth on the Product’s packing label at your expense.