Table of Contents
Advertisement
A
NEUVIDEO
Rotation Mode Configuration
The "I/O" tab in Rotation Mode provides control over input and output functions such as EDID selection, audio/video mute, OSD
Information, and custom graphics overlay. To return these settings to their factory defaults, click on the "Default" button. The "General"
tab provides control over the network configuration, and provides a way to initiate a firmware update or perform a factory reset. This tab
provides the same options in both operational modes.
6. OSD INFO TIMEOUT AND OFFSET: The OSD Info timeout value (in seconds) and horizontal and vertical position may be set here.
7. IMAGE OVERLAY DISPLAY: Enables or disables the custom image overlay feature.
Note: Enabling OSD Info will automatically disable the Image Overlay.
8. IMAGE OVERLAY UPDATE: To upload a custom overlay image, insert a USB thumb drive, with a valid graphics file named "LOGO.
BMP" (1920x1080 max resolution, 8-bit color) in the root directory, into the unit's USB service port then click the "Update" button.
9. IMAGE OVERLAY POSITIONING: Set the horizontal and vertical position of the upper-left corner of the custom overlay image.
The "Image" tab in Rotation Mode provides control over the automatic 360° rotation mode as well as the 45° fixed screen rotation mode.
To return these settings to their factory defaults, click on the "Default" button.
VIDEO W ALL CONTROL SOFTW ARE
1. EDID MODE: Select the preferred EDID for the unit to use
from the dropdown menu (FHD 2CH, FHD MCH, User, and
Sink).
2. EDID UPDATE: To upload a custom User EDID, insert a USB
thumb drive, with a valid EDID file named "USEREDID.BIN" in
the root directory, into the unit's USB service port then click the
"Update" button.
3. AV MUTE: Enables or disables the audio/video mute function.
When enabled, video output will be black, and audio will be
muted.
4. AUDIO MUTE: Enabled or disables the audio mute function.
When enabled, the audio output will be muted.
5. OSD INFO: The OSD Info On/Off selector both shows the
current OSD Info state and provides a control to manually
activate it. When "On" is manually selected the OSD Info will
show on the output until the set timeout value has expired then
it will revert to "Off".
1. AUTOMATIC 360° ROTATION MODE: Allows activation
of the automatic 360° rotation mode. Select the speed and
direction from the dropdown menu (slow counter-clockwise,
slow clockwise, fast counter-clockwise, fast clockwise, stop).
2. FIXED 45° ROTATION ANGLE MODE: Allows rotating the
source image to fixed, 45°, angles. Select the preferred rotation
angle from the dropdown menu.
12
Advertisement
Table of Contents
