Tap, Fav, Boost & Speed Mode - Strymon MultiSwitch Plus User Manual

MultiSwitch Plus
Tap, Favorite, Boost & Speed Mode
This mode allows you to connect up to three
dedicated footswitch functions.
Connect the included TRS cable to the EXP or
1
FAV jack of the pedal you wish to control.
Enter Tap, Favorite, Boost & Speed Mode by
2
holding down the B footswitch while connecting
the TRS cable to MultiSwitch Plus. The B LED
RED
will flash to confirm the selection and all
LEDs will illuminate.
Release the footswitch. The LEDs on MultiSwitch
3
Plus will all be lit. Press the footswitches to
assign each switch and jack pair to control Tap
(GREEN LED) or FAV/Boost/Speed
Press and hold the B footswitch to exit
4
configuration mode.
Check the Appendix
5
how to configure the connected pedal for
use in this mode.
- Extended Control
supported pedals
A
(RED LED).
Footswitch A
Output Signal
for instructions on
for independent,
1
B
Footswitch B
Output Signal
Check the Compatibility Chart on pg.15
1
details and a list of compatible pedals.
EXP
+
Footswitch C
Output Signal
Tap, Boost,
Fav or Speed
C
for
pg 7