Tap, Fav, Boost & Speed Mode Pedal Setup - Strymon MultiSwitch Plus User Manual

MultiSwitch Plus
Tap, FAV, Boost & Speed Mode Pedal Setup
A quick reference for the connected pedal setup. For more details see pedal user manual.
BigSky, Mobius, TimeLine
Setting EXP jack to Tap Tempo mode.
Press and hold the VALUE knob on your
1
TimeLine, BigSky or Mobius for at least
2 seconds to access the GLOBALS menu.
Release the VALUE knob.
Turn the VALUE knob until the display reads
2
EXP MD (expression mode).
Press and release the VALUE knob again,
3
then turn the VALUE knob to select the TAP
expression mode: TAP.
NOTE: On BigSky, tap tempo sets the Pre-Delay
time.
Brigadier, DIG, El Capistan, Flint
Setting EXP jack to Tap Tempo Mode.
Set both toggles to DOWN position.
1
Power up holding BOTH footswitches.
2
- Extended Control
Deco
Setting EXP jack to Tap Tempo mode.
Power up holding BOTH footswitches.
1
While holding footswitches, turn the
2
SATURATION knob to the 12 o'clock position.
Volante
Setting EXP jack to Tap Tempo mode.
Press and hold TAP footswitch at power up.
1
Turn ECHO LEVEL knob to the left until TAP LED
2
lights up AMBER.
Press TAP footswitch to exit.
3
Riverside
Setting BOOST jack to Boost mode.
Press and hold FAVORITE footswitch at
1
power up.
Turn DRIVE knob all the way to the right.
2
The FAVORITE LED will light up PURPLE.
Press the ON or FAVORITE footswitch once again
3
to store this setting and begin using Riverside.
pg 13