Maintenance; Grease Filters - Smeg KSEG56X Instruction Manual

MAINTENANCE

CLEANING METAL SELF-SUPPORTING GREASE FILTERS
• The filters must be cleaned every two months
of operation, or more frequently with heavy
usage.
• Remove the filters one at a time, after
disconnecting the relative fastening elements.
• Wash the filters, taking care not to bend them.
Allow them to dry before refitting.
• When refitting the filters, make sure that the
handle is visible on the outside.
• These filters are not washable and cannot be
regenerated, and
approximately every four months of operation,
or more frequently with heavy usage.
• Dismantle the ducting support pulling the two
pommels A simultaneously.
• Remove the saturated activated carbon filters
by releasing the fixing hooks.
• Fit the new filters by hooking them into their
seating.
• Close the ducting support by pushing and
connecting the two pommels A.
• 20 W halogen light.
• Dismantle the ducting support pulling the two
pommels A simultaneously.
• Extract the Lamp from the Support.
• Replace with another of the same type, making
sure that the two pins are properly inserted in
the lamp holder socket holes.
• Close the ducting support by pushing and
connecting the two pommels A.
GB

Grease filters

Odour filters (Recirculation version)
REPLACING ACTIVATED CHARCOAL FILTERS
must be replaced
Lighting
LIGHT REPLACEMENT
15